Calibration |
| Multifunction Electrical Calibrators |
 |
740 Series
The 740 Series does the work of several tools - sourcing or measuring pressure, temperature, and electrical signals in one rugged, hand-held device. For documentation, the 740 Series automates calibration procedures and captures your data - for easy. . .
|
 |
787 Process Meter
The 787 gives you the measurement capabilities you expect from our rugged, reliable DMMs plus the ability to source, simulate, or measure dc current with 1 microamp resolution and accuracy of 0. 05%. Put it all together and you have the ideal tool for. . .
|
Electrical |
| Cable Location & Testing |
 |
VoltAlert 1LAC / AC
Electricians, maintenance, service, safety personnel, and homeowners can quickly test for energized circuits and defective grounds on the factory floor, in the shop, or at home. Now available in two voltage rangesThe new VoltAlert 1LAC is for detecting. . .
|
| Clamp Meters |
 |
321 & 322
|
 |
330 Series
The series feature a large display that is backlit -on most models- so readings can be taken in virtually any lighting situation. Auto-shut-off maximizes battery life so the meter works when you need it. Clamp meters that fit the way you. . .
|
 |
T5 Series
|
| Disturbance Monitors |
 |
VR101S
The VR101S is a starter system that includes a compact VR 101 event recorder, an optical interface cable and Eventview software that turns your PC into a power quality reporting tool. Additional units can be purchased individually, so you can monitor. . .
|
| Insulation & Continuity testers |
 |
1520
FEATURES- Large, back-lit LCD with analogue bar graph and digital display
- Three output voltages for insulation resistance testing: 250V, 500V, 1000V
- Insulation resistance testing up to 4000 MOhms; switches automatically to. . .
|
| Multifunction - installation testers |
 |
1652 & 1653
Fluke 1652: Also provides RCD tripping current level and RCD auto-testing
|
| Multifunction Electrical Calibrators |
 |
705 Loop Calibrator
The Fluke 705 features: mA sourcing, simulation and measurement 0. 02% accuracy and 0. 001 mA resolution Simultaneous mA and % of span display Selectable step or ramp outputs 24 V Loop supply with mA measure 0-28 VDC measurement to check Loop. . .
|
 |
715
It is EMI tolerant, dust and splash resistant, and features a removable battery door for quick battery changes. FEATURES AT A GLANCE Measure loop current (0-20 mA, 4-20 mA) signals with very high accuracy of 0. 015% and 1 mA resolution Measure voltage. . .
|
 |
725
Do you need to calibrate transmitters? The 725's split display lets you view input and output values simultaneously. For valve and I/P tests, you can source mA while measuring pressure. The 725 has auto-stepping and auto-ramping for remote testing, plus. . .
|
|
|
741B Multifunction Process Calibrator
Whether you are calibrating instruments, troubleshooting a problem ,or running planned maintenance, the multifunction Fluke 741 Series Documenting Process Calibrator helps get the job done faster. It does so many different tasks, so quickly and so well,. . .
|
 |
743B
The 743B has a PC interface that lets you download procedures, lists, and instructions created with software-or upload data for printing, archiving, and analysis. With its expanded memory, the 743B can hold a full week of calibrations and procedures. The. . .
|
 |
744
The 744 combines HART communication capability to deliver an integrated communicating calibrator. This rugged, reliable tool is ideal for calibrating, maintaining, and troubleshooting HART and other instrumentation. The 744 does the work of several tools. . .
|
| Multimeters |
 |
10 Series
|
 |
110 Series ( 110, 111 & 112)
FEATURES True RMS measurements 0. 7% basic accuracy 6000 count resolution Digital display with analog bargraph AC/DC current measurements (111, 112) Backlight display (112) Manual and automatic ranging Display Hold Frequency and. . .
|
 |
12B
Auto Selection (V-Chek) simplifies voltage measurements in power environments. When measuring ohms/continuity with more than 4. 5 volts present across the input jacks (intentional or not) the meter automatically switches to measuring ac or dc volts,. . .
|
 |
16
Use the Fluke to test motor start and run capacitors up to 10,000 microfarads. Rely on the Fluke 16 to make your everyday measurements - up to 600 volts ac or dc, 40 megohms, diode test and exceptionally fast continuity. FEATURES Accurate. . .
|
 |
170 Series (175, 177 & 179)
|
 |
183 & 185
|
 |
187 & 189
FEATURES Extremely fast readings 50,000 counts display 0. 025% basic DC accuracy True RMS AC + DC measurements 100 kHz AC bandwidth for voltage and current Ergonomic high-impact overmolded case Dual display with bargraph and two-level. . .
|
 |
27
Designed to meet military specification of MIL-STD-28800 for Style A, Class 2 instruments, the Fluke 27 performs under the extremes of heat, cold, humidity, shock, electromagnetic interference, vibration and downright abuse. 3200-count digital display. . .
|
 |
45
FEATURES Multifunction vacuum fluorescent dual display allowing the user to measure two different parameters of the same signal from one test connection, and view both measurements at the same time. True-rms voltage and current, including ac +. . .
|
 |
7 Series
|
 |
73 III & 77 III
The 73 III is perfectly suited for many electronic applications and has the "classic" 70 series design with removable holster. The 77 III has all the features and functions for a wide range of industrial applications packaged in an ergonomic case with. . .
|
 |
80 Series III (83 III, 85 III & 87 III)
FEATURES AC True RMS measurements (Fluke 85 III, Fluke 87 III) Up to 0. 05% basic DC accuracy 4000 count resolution (20. 000 count in high resolution mode Fluke 87 III) 20 kHz bandwidth (Fluke 85 III, Fluke 87 III) Digital display with. . .
|
 |
867B Graphical Multimeter
Fluke 867B Graphical Multimeter FeaturesFeatures at a Glance: Waveform Display to 1 MHz Safety-rated to 1000V Digital Display/Counts Selectable True-rms or Average Sensing Continuity/Conductance/Capacitance Duty Cycle/Pulse. . .
|
| Multimeters (Basic) |
 |
Fluke 116 HVAC Multimeter with Temperature and Microamps
Compact true-rms meter for HVAC (heating ventilation air conditioning) troubleshooting. The Fluke 116 was specifically designed for the HVAC professional. It has everything needed in an HVAC meter including temperature and microamp measurements to. . .
|
| Portable Appliance Testers (PAT) |
 |
6500 PAT
Low weight
Weighing approx. 3 kg, the 6500 is lightweight and easy to carry around when working on-site. The hard carrying case not only offers protection during transit but also includes extra storage space for accessories and other tools. . . .
|
| Power & Energy Monitors / Analysers |
 |
LH1050 & LH1060
|
| Power, Energy & Harmonics Monitors / Analysers |
 |
43B
FEATURES Combines the most useful capabilities of a power quality analyzer, multimeter and scope Measure power harmonics, and catch intermittents Monitoring functions help track intermittent problems and power system performance Menus use. . .
|
Gas Detection |
| Carbon monoxide monitors |
 |
CO-210 Carbon Monoxide Probe
As a "stand alone" device the CO-210 has a Visible LED & an audible "beeper" which increases with frequency as the Carbon Monoxide levels rise. The C0-210 is battery powered.
|
 |
CO-220 Carbon Monoxide Meter
|
Pressure |
| Pressure Calibrators |
 |
718
Get the pressure without the weightThe Fluke 718 Pressure Calibrator offers a new approach to pressure calibration. A complete, self-contained calibration solution, the 718 offers: Built-in pressure / vacuum hand pump, with vernier and bleed valve. . .
|
Temperature |
| Infrared Thermometer / Pyrometers |
 |
61
Just press the green button and it comes alive. Targeting objects is easy with the bright laser beam. Even in the dark, the display is easy to read with its backlit screen. FEATURES Bright laser beam provides easy targeting Display clearly. . .
|
 |
65
Just press the green button and the instrument comes alive. Targeting objects is easy with the bright laser beam. Even in the dark, the display is simple to read with the quality backlit screen. After the measurement is done, you can scroll through the. . .
|
| Temperature Calibrators & Baths |
 |
500 Series Dry Block Calibrators
The Fluke 500 Series are certified to meet the stringent requirements of IEC 1010 and CSA safety certifications. Fluke's commitment to safety and precision measurement is embodied in the design of every 500 Series Dry-Block. Unique dual dry-block: Model. . .
|
 |
712 RTD
It is EMI tolerant, dust and splash resistant, and features a removable battery door for quick battery changes. FEATURES AT A GLANCE• Measure temperature from RTD output • Simulate RTD output • Operates with seven types of RTDs. . .
|
 |
714
It is EMI tolerant, dust and splash resistant, and features a removable battery door for quick battery changes. FEATURES AT A GLANCE• Measure temperature from TC output • Simulate TC output • Operable with nine types of thermocouples. . .
|
| Thermometers |
 |
50 series
The Fluke 51 II and 53 II models have a single thermocouple input . Fluke 52 II and 54 II can accomodate two thermocouple inputs and will display any combination of their values. The Fluke 53 II and 54 II allow data logging with adjustable log interval and. . .
|
 |
51II 52II 53II & 54II
FLUKE 50 SERIES II PRODUCTS FEATURES: Large backlit dual display shows any combination of T1, T2 (52 and 54 only), T1-T2 (52 and 54 only), plus MIN, MAX, or AVG Relative time clock on MIN, MAX, and AVG provides a time reference for major. . .
|
