 |
Chauvin Arnoux F05
The F05 is a new pocket-size, all-purpose, small-diameter clamp, operated with one hand. Multimeter clamp - 400A RMS & DC + Power/Phase rotation + Inrush current - 4000 count, backlit display
Availablity: Sale, Calibration
|
 |
Chauvin Arnoux F13N
Specially designed for equipment with non-linear loads, the F13N multimeter clamp gives an RMS measurement whether the current is deformed or sinusoidal. 700A RMS multimeter clamp -ø42 - 4000ct - Hz - Ω...
Availablity: Sale, Calibration
|
 |
Chauvin Arnoux F07
The F07 is a new pocket-size, all-purpose, small-diameter clamp, operated with one hand. Multimeter clamp - 400A TRMS AC + DC + Temperatures + Adaptor + Inrush current -4000ct, backlit display
Availablity: Sale, Calibration
|
 |
Chauvin Arnoux F15
The F15 is a simple to use RMS multifunction clamp meter. The unit is capable of AC/DC current (1000A), AC/DC voltage, resistance and frequency measurement. The unit can also perform continuity and diode tests. Additional features include a maximum, minimum and hold facility.
Availablity: Hire, Calibration
|
 |
Extech Instruments EX845
The Extech EX845 instrument is a CAT IV 1000A Clamp Meter + IR Thermometer + Bluetooth Transmitter with MeterLink™ software.
Availablity: Hire, Sale, Calibration
|
 |
Fluke T5 Series
Electrical tester with Open Jaw™ Current
The Fluke T5 Electrical Testers let you check voltage, continuity and current with one compact tool. With the T5, all you have to do is select volts, ohms, or current and the tester does the rest.
Availablity: Sale, Calibration
|
 |
LEM LH1020 & LH1025
Advanced jaw design means that 20-series accuracy is little affected by external magnetic fields or off-centre conductor
positioning. IEC 1010 safety features including a tactile barrier and special jaw design provide the user with confidence when making measurements in hazardous voltage areas. Conformance to EMC standards ensures high reliability through reduced susceptibility to electromagnetic interference.
Availablity: Calibration
|
 |
LEM LH630 LH635 & LH1035
Advanced jaw design means that 30-series accuracy is little affected by external magnetic fields or off-centre conductor positioning. Utilisation of Hall effect technology ensures a broad flat frequency response resulting in optimum accuracy even when harmonics are present. Two Jaw sizes LH630/35 – for cables up to 35 mm and LH1035 – for cables up to 50mm
Availablity: Calibration
|
 |
LEM LH240, LH1040 & LH2040
Advanced jaw design means that 40-series accuracy is little affected by external magnetic fields or off-centre conductor positioning. Utilisation of Hall effect technology ensures a broad flat frequency response resulting in optimum accuracy even when harmonics are present. There are 3 models in the 40 Series the LH240, LH1040 & LH2040 with max current ranges of 200, 1000 & 2000A AC DC respectively. Max conductor (cable) diameter is 50mm.
Availablity: Calibration
|
 |
Megger MMC850
Use the MMC850 anywhere where you want to measure current without breaking a circuit or splitting cables ie multicore. The MMC850 can also be used in place of traditional clamp meters, when commissioning, or for general maintenance work in electrical machinery and installations.
Availablity: Hire, Sale, Calibration
|
 |
Metrix MX3000
2-in-1, digital, 3000-count multimeter for measurement on any site. With the MX 3000 multimeter, you will be able to do the majority of your tests with only one instrument. voltage, current, resistance and continuity. You can easily transform it into an ammeter clamp by plugging the MX 3000-1 accessory into the multimeter.
Availablity: Calibration
|
 |
Metrix MX350
A 4000-count multimeter clamp - AC/DC, max cable diameters 26mm. With the essential functions (AC and DC voltage, AC current, Ω, frequency and continuity), the MX350 multimeter clamp is easy to grip and has a particularly readable display. It enables frequency to be measured for current (up to 10 kHz) and voltage (up to 1 MHz).
Availablity: Sale, Calibration
|
 |
Metrix MX355
A 4000-count multimeter clamp - AC/DC, Max cable diameter 30mm. Possessing the essential functions (AC and DC voltage, AC and DC current, Ω, frequency and continuity), the MX 355 multimeter clamp is particularly easy to grip. It is designed for measuring the current and voltage of car batteries. The automatic DC setting can also be ingeniously used for differential measurement.
Availablity: Sale, Calibration
|
 |
Metrix MX650
A 4000-count multimeter clamp - AC/DC Max cable diameter 36mm. The MX 650 clamp combines the functions of an AC/DC multimeter and an ammeter clamp for high current and voltage. As a multimeter, it measures voltage and resistance, tests diodes and continuity and also determines the frequency of voltage and current.
Availablity: Sale, Calibration
|
 |
Metrix MX655
A 4000-count multimeter clamp - AC/DC, RMS, Max cable diameter 40mm. A combined AC/DC multimeter and an ammeter clamp for high current and voltage, the MX 655 clamp not only determines the current and voltage frequency but also has an RMS converter for AC signals.
Availablity: Sale, Calibration
|
